The rate of dust contained in the air goes into the housing through the lower entrance by
transmission or absorption.
The dusts are attached to the surface of the pipr and emitted through the upper exit for a
purified clean air.
The dust particles which are attached to the surface are cleaned through the Pulsejet
mmthod which continuously emits the dust through the lower Hopper.
The cleaning device on the upper part is installed ith a Blow-tube with high pressured air
which emits the high pressured air instantaneously (7kg/cmﾂｲ) in 0.1seconds for the
"ventury" effect which eventually absorbs the secondary air in the five to seven times speed.
The Shock gives of vebration and the counter flow to the exterior that eliminated the attached dust effectively.
When the dust is shaked off it takes 会社紹介 0.1 second and the filtering area is not effected.
The same filter is cleaned every 1 to 3 minutes for the maintenance of uniform cleaning rate so that there is no need of wind amount change or pressure.
This allows a permanent safe operation of the M/C.
This machine has a welding structure which is compact for Economy Type.
Every process from the design to the assembly is done by us to allow convenient installation.